Disconnect the charger and use a voltmeter to check the voltage aiming for an average reading of around 12.42V. If the voltage is lower recharge the battery for an additional 12 hours. The conduct a load test by reinstalling the battery and turning on high beams to verify its performance under load. Once the cells are empty, you want to mix half a gallon of distilled water with half of a pound of baking soda. Once these are mixed together, use your plastic funnel to pour some into each cell. Once they are full, put the caps on the recondition battery and shake it to clean out the inside.
These are rechargeable batteries containing lithium ions in a non-aqueous electrolyte. The electrolyte comprises lithium salt, solvents, and additives. The ions move from the negative electrode (anode) to the positive electrode (cathode) through the electrolyte during discharge. When charging, the ions move from the cathode to the anode.

Send message to seller

Name

E-mail*

Phone number

Message*

*

This field is required

Send message

Clear